Beko is one of the most popular tumble dryer brands in the UK. They have heat pump technology that provides an efficient way to keep costs down when tumble drying, as well as being extremely reliable.
If you already own a Beko appliance, then you may be familiar with error codes on the tumble dryer. We have provided a list with all the information you need to decode the fault code system so that you can make changes or repairs yourself to get your machine up and running again.
| Error Code | Explanation |
|---|---|
| 0 | No Error |
| 1 | Door has opened during Run Mode |
| 2 | Water Tank Full |
| 3 | Drum empty |
| 4 | Start while door open |
| 5 | Drying finished at max time |
| 6 | Door NTC Open Circuit |
| 7 | Door NTC Short Circuit |
| 8 | Door NTC Over Heat |
| 9 | Heater (Compressor) NTC Open Circuit |
| 10 | Heater (Compressor) NTC Short Circuit |
| 11 | Heater (Compressor) NTC Over Heat |
| 12 | Drum belt broken |
| 13 | Filter blocked |
| 14 | Temperature Rapidly increased at the Heater |
| 16 | Low Voltage Error (Lower than 165V) |
| 17 | High Voltage Error (higher than 265V) |
